My Ooni Koda 16 is getting too hot after converting to natural gas.Updated 7 months ago

_Note_ : It's normal for Ooni's wood and gas-fueled pizza ovens to reach 950°F

(500°C). Before carrying out the following troubleshooting steps, make sure

you confirm that your oven is running hotter than this (or too hot on the

lowest setting).

---

If your Ooni Koda 16 is running too hot after converting to natural gas,

follow the steps below. Note: these are instructions if you have installed the

[Natural Gas Conversion Kit](https://ooni.com/products/ooni-natural-gas-

conversion-kit?_pos=3&_sid=6547e4be5&_ss=r), not the Ooni Koda 16 Natural Gas

Line oven.

**Step 1. **First, check to make sure you've installed the nozzles - if the

nozzles aren't present, too much gas will be flowing into your oven at once.

**Step 2. **Then, check your home gas supply pressure:

* Running Ooni Koda 16 on natural gas will require a home gas supply pressure of 7iwc.

* If your home gas supply pressure is **higher** than this, your oven will be overpowered. To fix this, you can purchase a regulator to reduce your home gas supply pressure. These can be found at your local hardware store such as Home Depot or Lowe's.

**Step 3.** Finally, reduce the flow of gas using the tap on your outlet.

Close over the tap until the flames look similar to the ones below: