How do I convert my Ooni Koda 16 to natural gas using the Natural Gas Conversion Kit?Updated 7 months ago

**Note: We recommend consulting your local gas specialist to assist you with

the conversion.

**

To convert your Ooni Koda 16 to natural gas with the [Natural Gas Conversion

Kit](https://ooni.com/products/ooni-natural-gas-conversion-

kit?_pos=3&_sid=1deaab09b&_ss=r), you'll need the following:

* 19mm (¾") wrench

* 14mm (9/16") wrench

* Phillips head screwdriver

You'll also need to ensure that your 'natural gas supply line termination'

(the output from your home) has a ⅜" male thread so that it's compatible with

the supplied quick connector:


If your natural gas supply line termination does not have a ⅜" male thread,

you can purchase an adaptor at your local hardware store such as Home Depot or

Lowe's.

Once you've confirmed that you have the correct natural gas supply line

termination, follow the installation steps outlined in our

[manual](https://assets2.brandfolder.io/bf-boulder-prod/qdvmo2-8alrig-

br4zb7/v/34580885/original/Ooni%20Koda%2016-Natural%20Gas%20Conversion-Manual-

SEPT2020_DIGITAL.pdf).

You can also watch our video guide:

Make sure you swap out the two propane nozzles and replace them with the

provided natural gas nozzles:


Natural gas has a lower pressure than propane, so the new nozzles (with a

wider opening) will allow more gas to flow into your oven at once. This will

ensure your oven is properly powered even when using the lowest setting.