How do I connect my gas burner's regulator to my gas bottle? (France only)Updated 9 months ago

If the regulator that was included with your Ooni gas burner doesn 't fit onto

your gas tank, you have two options.

**Source a new gas tank: **The 'Butagaz Cube' is a popular propane gas bottle

that is compatible with the Ooni-supplied 37mBar regulator. You can find more

information about it [here](https://www.butagaz.fr/bouteilles-de-gaz/cube-

propane).


**Switch the regulator: **If you don't want to source a new gas bottle, you

can source a new regulator to connect up to your preferred fitting of propane

gas bottle. If you do this, please ensure you use a 37mBar regulator to match

your oven. We also recommend using propane gas.

If swapping the regulator, always carry out a [_gas leak

test_](https://support.ooni.com/fr/come-si-esegue-una-prova-di-tenuta-del-gas-

BJdijR_zj) before firing up.

**If using butane**

Our products have been optimised for use with propane, but if you prefer to

use butane, you'll need to source a **28-30mbar** butane regulator that

connects to your butane gas bottle. This will look similar to the image below.


To swap the over the regulators, remove the 37mbar Ooni-supplied regulator

from the hose while keeping the hose connected to your gas burner. Secure the

new butane regulator onto the hose. It's important to perform a [_gas leak

test_](https://support.ooni.com/fr/come-si-esegue-una-prova-di-tenuta-del-gas-

BJdijR_zj) before firing up.

Please note that butane causes a sootier flame and it may take the oven longer

to heat up.

The '[Butagaz Cube](https://www.butagaz.fr/bouteilles-de-gaz/cube-propane)'

can also come with butane which will require a different regulator (similar to

the one pictured above). We recommend you consult a local gas expert to ensure

you have the correct regulator.